Products

Fiber Optic USB Cables

Fiber Optic DP Cables, also called Fiber Optic DisplayPort Cable or DisplayPort Active Optical Cable (AOC), is a digital audio/video interface cable designed to transmit DisplayPort signals over fiber optic lanes. It converts the electrical DisplayPort signal from the source device into an optical signal and converts it back to electrical at the display end. A typical hybrid construction uses fiber for the high-speed video/audio lanes and copper conductors for power and AUX channels.

Fiber Optic DP Cables commonly support DisplayPort 1.2 and DisplayPort 1.4 configurations, resolutions up to 4K@60Hz, 8K@60Hz with DSC, and 4K@120Hz/144Hz depending on the version and device capability. They also support multi-channel digital audio, HDCP, MST, and HDR where the source and display support these features. The cable is commonly used to connect PCs, GPUs, workstations, monitors, projectors, digital signage displays, control-room equipment, medical imaging systems, broadcast devices, and conference AV systems. It is especially suitable for long-distance transmission and environments with strong electromagnetic interference.

What's the Meaning of Standard DP, DP 1.4 and Fiber Optic DP Cables?

Standard DisplayPort Cable (Passive Copper): Supports common DisplayPort 1.2/1.4 signals for short-distance connections. Passive copper cables are cost-effective but have limited length at high bandwidth.

DisplayPort 1.4 Copper Cable: Supports up to 32.4 Gbps bandwidth and features such as 8K@60Hz with DSC, 4K@120Hz/144Hz, HDR, and MST. Copper versions are typically used for shorter runs.

Fiber Optic DP Cable (DP 1.2 AOC): Uses fiber optic lanes for long-distance transmission, commonly supporting 4K@60Hz over distances up to 100m depending on the design. It is immune to EMI/RFI and is ideal for long runs.

Fiber Optic DP Cable (DP 1.4 AOC): Supports higher bandwidth up to 32.4 Gbps and is designed for long-distance 8K@60Hz with DSC, 4K@120Hz/144Hz, HDR, and multi-stream applications. It is suitable for high-bandwidth professional and commercial installations.

What's AWG & Shielding Mean in Fiber Optic DP Cables?

AWG (American Wire Gauge): In a Fiber Optic DP Cable, AWG mainly refers to the copper conductors used for power and AUX channels in a hybrid AOC construction. Common gauges range from 24 AWG to 28 AWG. Lower AWG numbers mean thicker copper conductors, which can provide lower resistance and more stable power delivery. The high-speed signal lanes are fiber optic and are not rated by AWG.

Shielding: The fiber optic lanes are inherently immune to electromagnetic interference (EMI) and radio frequency interference (RFI). However, the copper power/AUX conductors and connector sections may still use shielding, metal housings, and strain relief to ensure stable performance. Proper shielding and mechanical protection are important for professional installations, especially when cables are routed near power lines or industrial equipment.

Fiber Optic DP Cables — Application Scenarios

Long-distance GPU/workstation to monitor connections

Control rooms and command centers

Digital signage and video walls

Conference rooms, boardrooms, and presentation systems

Medical imaging and diagnostic displays

Broadcast, post-production, and studio equipment

High-refresh gaming and VR setups where long cable runs are required

Projector and large-format display connections

Industrial and EMI-heavy environments

Docking stations and multi-display workstations

What Colors Available for Fiber Optic DP Cables?

Fiber Optic DP Cables are commonly available in:

Black — Most standard and widely available
White — Popular for indoor and office installations
Gray — Common for commercial and custom installs
Custom colors — Available upon request for OEM/ODM orders, such as red, blue, yellow, and green

What's the Super Advantages of Fiber Optic DP Cables by Comparison to Other Traditional A/V Cables?

Compared with passive copper DisplayPort cables, HDMI cables, and older analog A/V cables, Fiber Optic DP Cable offers:

Long-Distance Transmission: Supports stable signal transmission over much longer distances, commonly up to 30m, 50m, or 100m depending on the product design.

EMI/RFI Immunity: Fiber optic lanes are not affected by electromagnetic interference, making the cable suitable for industrial, medical, broadcast, and dense electronic environments.

High Bandwidth: DP 1.4 Fiber Optic DP Cables support up to 32.4 Gbps, enabling 8K@60Hz with DSC and 4K@120Hz/144Hz configurations.

Lightweight and Thin: Fiber optic construction is lighter and more flexible than long copper cables, making routing through conduits and cable trays easier.

No Signal Degradation over Long Runs: Optical transmission avoids the severe attenuation and signal loss typical of long copper cables.

Galvanic Isolation: Fiber optic transmission helps eliminate ground loops and electrical interference between connected devices.

Plug-and-Play Convenience: Most Fiber Optic DP Cables are bus-powered and require no external power supply. They are hot-pluggable when used with compatible DisplayPort devices.

Backward Compatibility: Works with DisplayPort 1.2/1.4 devices and can be used with appropriate adapters for HDMI, DVI, VGA, Mini DisplayPort, or USB-C source/display configurations where supported.

How to Connect Fiber Optic DP Cables & DP Adapters?

Direct Connection: Plug the source connector into the DisplayPort output of your PC, laptop, GPU, or workstation, and connect the display connector to the DisplayPort input of your monitor, projector, or display. Most Fiber Optic DP Cables are directional, so be sure to connect the source and display ends correctly. The connection is plug-and-play and automatically negotiates the best supported resolution.

Adapter Options:

DisplayPort to HDMI Adapter: Connects DP sources to HDMI displays; active adapters are recommended for high-resolution or long-distance setups.

DisplayPort to DVI Adapter: Connects DP sources to DVI displays; video only.

DisplayPort to VGA Adapter: Converts digital DP signals to analog VGA for legacy monitors and projectors.

Mini DisplayPort to DisplayPort Adapter: Connects Mini DP sources to standard DP displays.

USB-C to DisplayPort Adapter: Connects USB-C devices with DP Alt Mode to DisplayPort displays.

DisplayPort Female-to-Female Coupler: Joins two DP cables for extension; not recommended for high-bandwidth AOC runs unless specifically supported.

DisplayPort Wall Plates: For permanent in-wall and faceplate installations.

DisplayPort Repeater/Extender: For specialized long-distance extensions beyond the cable’s standard reach.

DisplayPort to DisplayPort Extension Adapter: For compatible extension and installation requirements.

Extension Methods:

Use a longer Fiber Optic DP Cable or an active optical DisplayPort extender for distances beyond standard copper limits.

Avoid reversing the source and display ends of a directional AOC.

Keep the cable bend radius within the manufacturer’s specification; avoid tight coiling, sharp bends, or excessive pulling force.

Use active adapters and repeaters that support the required resolution, bandwidth, HDCP version, and DisplayPort version.

What Kind of Fiber Optic DP Cable Accessories & Adapters Can TLD Provide?

HDMI/DP cable suppliers can typically provide the following accessories:

Cables:

Fiber Optic DP 1.2 and DP 1.4 AOC cables in various lengths, such as 5m, 10m, 15m, 20m, 30m, 50m, and 100m

Custom length cables for OEM/ODM projects

Right-angle and slim connector options for tight spaces

LSZH, PVC, TPU, or nylon-braided jacket options

In-wall rated and armored fiber optic DP cable options where required

Adapters & Connectors:

DisplayPort to HDMI adapters

DisplayPort to DVI adapters

DisplayPort to VGA adapters

Mini DisplayPort to DisplayPort adapters

USB-C to DisplayPort adapters

DisplayPort female-to-female couplers

DisplayPort male-to-male extension adapters

DisplayPort wall plates and faceplates

DisplayPort repeaters and extenders

Installation Accessories:

Cable management clips and ties

Protective caps for unused connectors

Fiber optic cleaning kits

Signal repeaters and boosters

Fiber optic DP extenders

Which Standards Do Fiber Optic DP Cables Meet?

Fiber Optic DP Cables are typically manufactured to comply with the following standards:

Standard

Description

DisplayPort 1.2 / 1.4

Compliant with VESA DisplayPort specification requirements

HDCP 1.4 / 2.2

Content protection compliance where applicable

VESA DP CTS

DisplayPort compliance test reports available

UL Listed

Underwriters Laboratories safety standard where applicable

CMG / CMX Rated

General-purpose and outdoor-rated cable jackets

CMR Rated

Riser-rated for in-wall installation and fire safety

CMP Rated

Plenum-rated for air-handling spaces

RoHS Compliant

Restriction of Hazardous Substances compliance

REACH Compliant

Registration, Evaluation, Authorization, and Restriction of Chemicals

CE Certified

European conformity for safety and environmental standards

FCC Certified

U.S. Federal Communications Commission compliance for EMI

What Certifications Can Suppliers Provide for Fiber Optic DP Cables?

Reputable Fiber Optic DP Cable suppliers can typically provide:

DisplayPort Compliance / VESA DP CTS Test Reports — Validation of DisplayPort signal and interoperability requirements

HDCP Compliance — Content protection compatibility where required

UL Certification — Safety compliance where applicable

CE Certification — European market conformity

RoHS & REACH Compliance — Environmental and chemical safety

ISO 9001 — Quality management system

Flame Retardant Certificates — CMP, CMR, CMG, and LSZH ratings where applicable

EMI/EMC Test Reports — Electromagnetic compatibility

Material Test Reports — Fiber type, copper conductor gauge, shielding effectiveness, and mechanical properties

Optical Performance Test Reports — Insertion loss, return loss, and signal stability where applicable

What's the Technical Characteristics of Fiber Optic DP Cable?

Parameter

Specification

Connector Type

Standard DisplayPort male to male, 20-pin; latching connector optional; Mini DP and USB-C options via adapters

Conductor Material

Hybrid construction: fiber optic lanes plus copper conductors for power/AUX; copper 24–28 AWG typical

Fiber Type

OM2/OM3 or other multimode fiber depending on length and bandwidth requirements

Shielding

EMI/RFI protection on copper conductors and connector housing; fiber lanes are inherently immune

Jacket Material

PVC, TPU, LSZH, or nylon braided for durability and flexibility

Temperature Range

Typically -20°C to 70°C / -4°F to 158°F

Bandwidth

DP 1.2: up to 21.6 Gbps; DP 1.4: up to 32.4 Gbps

Supported Resolutions

DP 1.2: up to 4K@60Hz; DP 1.4: up to 8K@60Hz with DSC and 4K@120Hz/144Hz depending on device support

Audio Support

Multi-channel digital audio

HDCP Support

HDCP 1.4 / 2.2 where applicable

MST Support

Yes, depending on source and display capability

HDR Support

Yes, DP 1.4 models where supported

Connector Plating

Gold-plated contacts for corrosion resistance

Outer Diameter

Typically 4.0mm–6.0mm depending on jacket, fiber, and connector design

Cable Length

Common lengths from 5m up to 100m; custom lengths available

Power Supply

Bus-powered typical; no external power supply required for most designs

Directionality

Most AOC models are directional; source and display ends must be connected correctly

Bend Radius

Refer to product datasheet; avoid sharp bends and tight coiling

What's the Packaging Methods of Fiber Optic DP Cable?

Fiber Optic DP Cables are typically packaged using the following methods:

PE Bag + Box — Standard retail packaging with individual boxes
Blister Pack / Clamshell — Common for consumer retail displays
OP Bag — Simple poly bag for bulk orders without retail branding
Gift Box — Premium packaging for high-end products
Carton Box — Bulk packaging for wholesale and distribution orders
Custom Packaging — Available upon request with OEM/ODM branding

Packaging often includes protective caps on both cable ends to prevent dust ingress and connector damage during shipping. Fiber optic cables should be coiled with a safe bend radius and protected from excessive pressure.

How to Inquire to TLD for a Quote of Fiber Optic DP Cable?

To request a quote for Fiber Optic DP Cable, please provide the following information and contact sales06@tldcable.com:

1. Product Specifications:

Required length, such as 5m, 10m, 15m, 20m, 30m, 50m, or 100m

Connector type, such as DisplayPort male to male, Mini DP to DP, or USB-C to DP

DisplayPort version: DP 1.2 or DP 1.4

Required resolution and refresh rate, such as 4K@60Hz, 8K@60Hz with DSC, or 4K@120Hz/144Hz

Fiber type and cable construction requirements

Jacket material: PVC, TPU, LSZH, or nylon braided

Color preference

2. Quantity:

Order quantity

Sample order or bulk order

3. Customization Requirements:

Custom length needed?

Custom color?

Custom connector plating, such as gold or nickel?

Custom packaging and branding for OEM/ODM?

Right-angle, slim, armored, or in-wall rated designs?

4. Certification Requirements:

Any specific certifications needed, such as DisplayPort CTS, HDCP, UL, CE, RoHS, or REACH?

Any specific testing or inspection requirements?

5. Shipping & Delivery:

Destination country/port

Preferred shipping method: air, sea, or express

Required delivery timeline

Recommended TLD's Other Products:

USB Cables

DP Cables

Starlink Cable

USB C Cables

Computer Monitor Cable

Patch Cord Cable

Fiber Optic Cable

HDMI Cables

View as  
 
Fiber Optic USB C cable

Fiber Optic USB C cable

TLD, a professional manufacture and supplier, its Fiber Optic USB-A to USB-C Cable, for applications requiring USB-C connectivity beyond the 1–3 meter limitation of copper cables, while still needing to connect to legacy USB-A host ports, TLD's Fiber Optic USB 3.1 USB-A to USB-C Active Optical Cable (AOC) delivers a practical, high-performance solution. This hybrid cable uses optical fiber for high-speed data transmission and copper conductors for power delivery, enabling extension distances of up to 50 meters or more with no signal loss or interference. It is thinner, lighter, and more flexible than conventional copper cables, while being completely immune to EMI/RFI interference. Supporting USB 3.1 Gen 2 data rates up to 10 Gbps, it achieves performance over extended distances that copper simply cannot match—making it an ideal choice for professional installations, industrial automation, and AV systems where a USB-A host must connect to a USB-C peripheral across a large space.
Fiber optic USB C to USB C cable

Fiber optic USB C to USB C cable

TLD, a professional manufacture and supplier, its Fiber Optic USB 3.1 USB-C to USB-C Active Optical Cable (AOC) is replacing copper conductors with optical fiber for high-speed data transmission, while maintaining copper wires for power delivery. This hybrid design enables transmission distances up to 100 meters with zero signal loss, complete immunity to EMI/RFI interference, and a cable that is significantly thinner, lighter, and more flexible than traditional copper equivalents. Supporting USB 3.1 Gen 2 data rates up to 10 Gbps and DisplayPort Alt Mode for 4K@60Hz video, this cable delivers uncompromised performance over distances that copper simply cannot achieve — making it the ideal solution for demanding professional installations and high-end consumer setups alike.
TLD Electronics is a professional Fiber Optic USB Cables manufacturer and supplier in China. We warmly welcome you to wholesale OEM products from our factory.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept