Products

DisplayPort Cable 2.0

DisplayPort Cable 2.0 - The Definitive Guide for High-Performance Connectivity

What is DisplayPort Cable 2.0?

DisplayPort Cable 2.0 is the next-generation digital audio/video interface cable designed to transmit ultra-high-definition video and audio signals between a source device (such as a PC, laptop, or graphics card) and a display (monitor, TV, or projector). Developed by the Video Electronics Standards Association (VESA), DisplayPort 2.0 represents the first major evolution of the DisplayPort standard in six years, delivering a massive increase in bandwidth—up to 80 Gbps—nearly tripling the capacity of its predecessor, DisplayPort 1.4 .

Unlike standard HDMI cables that are more commonly found on consumer TVs, DisplayPort cables are the preferred choice for PC gaming, professional workstations, and multi-monitor setups due to their superior bandwidth, support for higher refresh rates at extreme resolutions, and features like Multi-Stream Transport (MST) for daisy-chaining multiple monitors from a single connection . The DisplayPort Cable 2.0 is purpose-built for demanding applications including high-end gaming, video editing, 8K/16K content creation, virtual reality, and professional AV installations .

What Are the DisplayPort Cable 2.0 Transmission Modes and Certification Standards?

DisplayPort Cable 2.0 introduces three new Ultra High Bit Rate (UHBR) transmission modes that define the cable's performance capabilities. Not all DisplayPort 2.0 cables support the same bandwidth, which is why VESA has established a certification system to help buyers identify cable performance levels .

UHBR Transmission Modes:

Transmission Mode

Bandwidth per Lane

Total Bandwidth

Typical Application

UHBR 10

10 Gbps

40 Gbps

4K at 144Hz, 8K at 30Hz (uncompressed)

UHBR 13.5

13.5 Gbps

54 Gbps

High-refresh 4K, multi-monitor setups

UHBR 20

20 Gbps

80 Gbps

8K at 85Hz, 16K at 60Hz (with DSC)

Super Advantages of DisplayPort Cable 2.0 vs. Traditional Cables

DisplayPort Cable 2.0 offers transformative advantages over earlier standards and competing interfaces like HDMI 2.1. Here are the key benefits:

1. Unmatched Bandwidth Performance

DisplayPort Cable 2.0 delivers up to 80 Gbps total bandwidth (77.37 Gbps data rate), nearly 3 times faster than DisplayPort 1.4 (32.4 Gbps) and nearly double that of HDMI 2.1 (48 Gbps) . This extreme bandwidth enables resolutions and refresh rates previously impossible with a single cable:

16K at 60Hz with HDR (with DSC 1.2a compression)

8K at 120Hz (uncompressed up to 85Hz, with DSC up to 120Hz)

4K at 240Hz for ultra-smooth gaming

Two 8K displays at 120Hz with HDR

Three 10K displays at 60Hz with HDR (with DSC)

2. Superior Gaming Performance

DisplayPort Cable 2.0 supports both AMD FreeSync and NVIDIA G-Sync adaptive sync technologies, eliminating screen tearing and stuttering for a fluid gaming experience—a critical advantage over HDMI, which often limits G-Sync compatibility . With support for refresh rates up to 360Hz at 2K resolution and 240Hz at 4K, DisplayPort 2.0 is the definitive choice for competitive gamers .

3. Multi-Monitor Efficiency (MST)

The Multi-Stream Transport (MST) feature allows a single DisplayPort Cable 2.0 connection to drive multiple monitors in a daisy-chain configuration, reducing cable clutter and freeing up ports on your graphics card . This is particularly valuable for professional workstations, trading floors, and control rooms.

4. Advanced Compression Technology

DisplayPort Cable 2.0 incorporates Display Stream Compression (DSC) 1.2a, a visually lossless compression standard that enables ultra-high resolutions beyond the raw bandwidth limits of the cable . Combined with Forward Error Correction (FEC), it ensures stable signal integrity even under extreme data loads .

5. Backward Compatibility

DisplayPort 2.0 Cables are fully backward compatible with all earlier DisplayPort versions (1.4, 1.3, 1.2, 1.1, and 1.0), allowing you to use the cable with legacy equipment while future-proofing your setup .

6. Superior Shielding and Signal Integrity

Premium DisplayPort Cable 2.0 features triple-layer shielding, tinned copper conductors, and 24K gold-plated connectors to resist electromagnetic interference (EMI) and deliver artifact-free, synchronized audio/video transmission even in electrically noisy environments .

7. Secure Locking Connectors

DisplayPort Cable 2.0 features a latching mechanism that ensures a secure connection, preventing accidental disconnection during use—a critical feature for esports, public displays, and industrial applications .

8. Power Efficiency

DisplayPort Cable 2.0 introduces Panel Replay, a feature that optimizes power consumption by rendering only the portions of the screen that have changed since the previous frame—particularly beneficial for laptops and portable devices .

Technical Characteristics of DisplayPort Cable 2.0

Parameter

Specification

Standard

DisplayPort 2.0 (VESA certified)

Maximum Bandwidth

80 Gbps (UHBR 20) / 40 Gbps (UHBR 10)

Maximum Resolution

16K@60Hz (with DSC), 8K@120Hz, 4K@240Hz

Transmission Modes

UHBR 10, UHBR 13.5, UHBR 20

Connector Type

DisplayPort Male to DisplayPort Male (20-pin)

Connector Plating

24K Gold-plated contacts

Conductor Material

Pure copper (28 AWG or 26 AWG) / Tinned copper / Bare copper

Shielding

Triple-layer shielding (Aluminum Mylar + Braid)

Jacket Material

PVC (standard) or Braided Nylon (industrial grade)

Cable Form Factor

Round cable

Locking Mechanism

Latching connectors for secure connection

Supported Features

HDR10, HDCP 2.2, DSC 1.2a, FEC, MST, Panel Replay

Backward Compatibility

DP 1.4, 1.3, 1.2, 1.1, 1.0

Operating Temperature

-20°C to 80°C (-4°F to 176°F)

Storage Temperature

-25°C to 85°C (-13°F to 185°F)

Compliance Standards

RoHS, REACH, UL

Packaging Methods for DisplayPort Cable 2.0

DisplayPort 2.0 cables are typically packaged using the following methods :

Polybag (OP Bag) — Simple poly bag packaging for bulk orders and cost-effective wholesale shipments

PE Bag + Box — Standard retail packaging for individual cables with product branding

Gift Box — Premium retail packaging for high-end consumer products

Carton Box — Bulk packaging for wholesale orders with protective inserts

Custom Packaging — Available upon request with OEM/ODM services, including logo printing, retail-ready packaging, and branded boxes

Packaging typically includes protective caps on both cable ends to prevent oxidation and damage before and after use.

How to Inquire to Suppliers for a Quote of DisplayPort Cable 2.0?

To request a quote for DisplayPort 2.0 cables, please provide the following information and contact your preferred supplier:

1. Product Specifications:

Which version? (DisplayPort 2.0 / DisplayPort 2.1)

Required cable length (e.g., 0.5m, 1m, 1.5m, 2m, 3m, 5m, custom lengths)

Connector type (DisplayPort Male to DisplayPort Male, with or without latch)

Conductor gauge (28 AWG / 26 AWG)

Shielding requirement (Triple-shielded / Standard)

Jacket material (PVC / Braided Nylon)

Color preference (Black / White / Custom)

2. Quantity:

Order quantity

Sample order or bulk order

3. Customization Requirements:

Custom length needed?

Custom color?

Custom packaging?

OEM/ODM branding requirements? (Logo printing, retail box design)

4. Certification Requirements:

Specific certifications needed (UL, CE, RoHS, REACH, VESA certification)?

Specific testing or inspection requirements?

5. Shipping & Delivery:

Destination country/port

Preferred shipping method (air, sea, express)

Required delivery timeline

Recommended Products from TLD

As a leading China DisplayPort Cable Manufacturer and China DisplayPort Cable Supplier, TLD offers a comprehensive range of high-performance connectivity solutions, including:

DisplayPort 2.0 Cables — DP40 and DP80 certified, supporting up to 80Gbps bandwidth

DisplayPort 1.4 Cables — 8K@60Hz, HDR support

Mini DisplayPort Cables — For laptops and compact devices

USB-C to DisplayPort Adapters — For USB-C Alt Mode connectivity

HDMI to DisplayPort Adapters — For cross-platform compatibility

Custom Cable Assemblies — OEM/ODM services with custom lengths, colors, and branding

All TLD DisplayPort cables are manufactured to international standards, with certifications including UL, CE, RoHS, REACH, and are available with VESA certification upon request. TLD is an ISO 9001-certified manufacturer with over 13 years of experience in the cable industry .

View as  
 
Aluminum Alloy Shell DP 2.0 Male to Male Cable

Aluminum Alloy Shell DP 2.0 Male to Male Cable

As display resolutions push beyond 8K and refresh rates climb toward the limits of human perception, the cable bridging your graphics card and monitor becomes a critical performance factor. TLD, a professional manufacture and supplier, offers the Aluminum Alloy Shell DP 2.0 Male to Male Cable — a premium connectivity solution built to harness the full 80 Gbps bandwidth of the DisplayPort 2.0 standard. Manufactured in our Guangdong facility, this cable delivers the high-speed signal transmission required for 16K displays, ultra-smooth gaming, and professional multi-monitor workstations. The robust aluminum alloy housing not only provides superior heat dissipation and corrosion resistance but also ensures long-term durability in demanding usage environments.
TLD Electronics is a professional DisplayPort Cable 2.0 manufacturer and supplier in China. We warmly welcome you to wholesale OEM products from our factory.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept