Products
USB to TTL cable
  • USB to TTL cableUSB to TTL cable
  • USB to TTL cableUSB to TTL cable
  • USB to TTL cableUSB to TTL cable
  • USB to TTL cableUSB to TTL cable
  • USB to TTL cableUSB to TTL cable
  • USB to TTL cableUSB to TTL cable
  • USB to TTL cableUSB to TTL cable

USB to TTL cable

TLD Electronic, a China manufacturer and supplier, offers USB to TTL cable, it features a USB Type-A male connector on one end and a 4-pin Dupont female connector on the other with FTDI chipset. The cable is approximately 1 m long and exposes four wires: red +5V, black GND, white RXD, and green TXD. It is suitable for USB-to-TTL serial communication, debugging, firmware upgrade, and download applications.

The module can be used for simple serial communication, router or ADSL firmware upgrade, GPS serial communication, hard drive firmware upgrade, satellite receiver upgrade, HyperTerminal and common serial debugging tools, and other similar applications. The latest design includes an additional 3.3V solder pad, but users must open the USB shell and solder it themselves. Please confirm the wire assignment, target device voltage level, and usage method before purchase. This product only guarantees normal serial communication. It does not provide flashing technical support and does not guarantee flashing results.

Product Specifications

Parameter

Details

Product Name

USB to TTL cable

Chipset

FTDI

Host Connector

USB Type-A male

Device Connector

4-pin Dupont female

Wire Assignment

Red +5V; Black GND; White RXD; Green TXD

Cable Length

Approx. 1 m

Connection Method

Module RXD to target TXD; module TXD to target RXD; GND to GND

3.3V Solder Pad

Latest design includes an extra 3.3V solder pad; requires opening the USB shell and soldering by the user

Main Functions

Simple serial communication, router/ADSL firmware upgrade, GPS serial communication, hard drive firmware upgrade, satellite receiver upgrade, HyperTerminal/common serial debugging, etc.

Technical Support Note

Only normal serial communication is guaranteed; no flashing technical support and no guarantee of flashing success

Packaging / OEM

Please confirm bulk order, packaging, and OEM requirements with the supplier

Important Note

The product name includes RS232/COM, but the exposed wires carry TTL serial signals, not standard RS232 levels. Confirm target device level and wire assignment before connection.

Key Features & Benefits

1. FTDI  USB-to-TTL Serial Communication

Using the FTDI chipset, the module converts USB signals to TTL serial signals for serial debugging, firmware upgrade, and download applications.

2. Clear Four-Wire Assignment

The cable exposes red, black, white, and green wires corresponding to +5V, GND, RXD, and TXD , making it convenient to connect according to the target device interface definition.

3. Cross Connection Without MAX232 Conversion

Connect RX to TX, TX to RX, and GND to GND  to communicate directly with MCU and other TTL serial devices, without an additional MAX232 conversion board.

4. Approx. 1 m Length for Short-Distance Connections

The approx. 1 m cable length is suitable for desktop debugging, short-distance serial communication between devices, and upgrade operations, balancing convenience and cable management.

5. Versatile Serial Upgrade Board

It can be used for router/ADSL firmware upgrade, GPS serial communication, hard drive firmware upgrade, satellite receiver upgrade, HyperTerminal, and common serial debugging tools.

6. Reserved 3.3V Solder Pad

The latest design reserves a 3.3V solder pad for users with soldering experience. The USB shell must be opened and the pad soldered by the user. Do not attempt this if you lack soldering experience or do not understand the circuit.

7. Clear Usage Boundaries

This product only guarantees normal serial communication. It does not provide flashing tutorials or technical support and does not guarantee flashing results. Please confirm that you understand the usage method and device compatibility before purchase.

Application Scenarios

Router / ADSL Firmware Upgrade : For device upgrade and debugging where TTL serial connection is supported.

GPS Serial Communication : Connect GPS modules for serial data communication.

Hard Drive Firmware Upgrade : For hard drive upgrade scenarios requiring a TTL serial connection.

Satellite Receiver Upgrade : Commonly known as a Zhongjiu flashing cable, used for related satellite receiver upgrade operations.

MCU / Microcontroller Debugging : Connect to MCU TX, RX, and GND for serial communication.

HyperTerminal / Serial Debugging Tools : Work with common serial debugging software for data transmission and debugging.

Technical Construction

USB Interface : USB Type-A male for connecting to a computer USB port.

Control Chip : FTDI USB-to-serial chip.

Cable Structure : Black cable, approx. 1 m, with four exposed wires.

Device-Side Connector : 4-pin Dupont female; wire assignment: red +5V, black GND, white RXD, green TXD.

3.3V Solder Pad : Reserved inside the USB shell; requires opening the shell and soldering by the user.

Connection Method : RX to TX, TX to RX, GND to GND.

Quality Assurance & Usage Notes

This product is supplied with normal serial communication as the basic quality requirement. Because flashing, upgrading, and wiring involve differences in target devices, driver installation, voltage-level matching, and operating methods, this product does not provide flashing technical support and does not guarantee flashing results.

Before use, please confirm:

Whether the target device serial level and wire assignment match;

Whether RXD and TXD are connected in a cross manner;

Whether GND is connected in common;

Whether +5V needs to be connected, and avoid connecting power incorrectly and damaging the device;

The 3.3V solder pad requires opening the USB shell and soldering; non-professionals should not attempt this;

If you encounter flashing or device upgrade problems, please seek help from professional flashing forums.

Ordering & Customization

This product is suitable for users who need a USB-to-TTL serial download cable, upgrade board, and serial debugging cable. For bulk purchases, packaging methods, OEM requirements, or version confirmation, please contact our sales team and confirm the wire assignment, 3.3V solder pad version, and usage requirements before ordering.

FAQ

Q1: What is the wire assignment of this cable?

A: Red is +5V, black is GND, white is RXD, and green is TXD.

Q2: How should I connect it to the target device?

A: Connect the module RXD to the target TXD, the module TXD to the target RXD, and GND to GND. Please confirm with the target device requirements whether +5V needs to be connected.

Q3: Is this a standard RS232 cable?

A: The product name includes RS232/COM, but the product actually exposes TTL serial signals, not standard RS232 levels. Do not connect it directly to a standard RS232 interface. Confirm the target device level before connection.

Q4: How do I use the 3.3V pad?

A: The latest design reserves a 3.3V solder pad, which requires opening the USB shell and soldering by the user. Do not attempt this if you have no soldering experience or do not understand the circuit.

Q5: Do you provide flashing tutorials and technical support?

A: No. This product only guarantees normal serial communication, does not guarantee flashing success, and does not provide flashing technical support. If you encounter flashing problems, please seek help from professional flashing forums.

Q6: What is the cable length?

A: Approx. 1 m; please refer to the actual product.


Q7: Do you support bulk orders or OEM?

A: For bulk orders, packaging, and OEM requirements, please contact the supplier to confirm the specific configuration and quotation.


Contact Us

For bulk purchases, confirmation of the wire assignment version, 3.3V solder pad version, or OEM packaging solutions, please contact the supplier’s sales team. Please confirm the product version and usage requirements before ordering. This product does not provide flashing technical support.

Send Inquiry
Contact Info
  • Address

    Factory:No. 1, 2nd Street, Shujiu Industrial Park, Changping Town, Dongguan City,Guangdong Province, China
    Sales Office:NO.505, Tianhui Block, Fukang Community, Longhua Street, Longhua District, Shenzhen City,Guangdong province, China

Need starlink cable, HDMI cable, SAS cables? Contact TLD Electronics to discuss OEM, custom or bulk requirements and request a quotation.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept